CADprofi Mechanical content
Here you can easily check CADprofi Mechanical content by typing the element name or standard number.
| Name | Standard |
| Search this column by typing the element name... | Search this column by typing the standard reference number... |
Bolts: | |
| Hexagon head bolt - Product grade A and B | ISO 4014, EN ISO 4014, DIN EN ISO 4014, PN EN ISO 4014, IS 1364-1, BS EN 24014 |
| Hexagon head bolt - Product grade A and B upr | ISO 4014 |
| Hexagon head bolt | ISO 4017, EN ISO 4017, DIN EN ISO 4017, PN-85/M-82105, GOST 7796-70, IS 1364-2, JIS B 1180, BS EN 24017 |
| Hexagon head screws | ISO 4018, IS 1363-2, JIS B 1180 A+B, BS EN ISO 4018 |
| Hexagon head bolt, with fine pitch thread | ISO 8676, EN ISO 8676, DIN EN ISO 8676, PN-85/M-82105, GOST 7796-70, JIS B 1180, BS EN 28676 |
| High-strength hexagon head bolts with large widths | ISO 7412, EN 14399-4, DIN 6914, PN EN 14399-3 |
| System HV - Hexagon fit bolt | EN 14399-8 |
| Hexagon flange head bolt | ISO 4162, EN ISO 4162, DIN 6921, PN 82247 |
| Hexagon socket countersunk head screw | ISO 10642, EN ISO 10642, DIN 7991, PN-EN ISO 10642 |
| Hexagon head bolt - Product grade C | ISO 4016, ANSI B 18.2.1, ASME B 18.2.1, EN ISO 4016, DIN EN ISO 4016, PN EN ISO 4016, IS 1363-1, JIS B 1180 C, BS EN ISO 4016 |
| Hexagon head bolt - Product grade B - Reduced shank | ISO 4015, EN 24015, DIN EN 24015, PN-EN 24015, BS EN ISO 4015 |
| Hexagon socket head cap screw | ISO 4762, EN ISO 4762, DIN EN ISO 4762, PN-EN ISO 4762, GOST 11738-84, IS 2269, BS 4168 |
| Countersunk flat niob bolt with cross recess type H | ISO 7047, EN ISO 7047, DIN-EN ISO 7047, PN-EN ISO 7047, GOST 17474-80, IS 7486, JIS B 1111, BS EN ISO 7047 |
| Countersunk flat niob bolt with cross recess type Z | ISO 7047, EN ISO 7047, DIN-EN ISO 7047, PN-EN ISO 7047, GOST 17474-80, IS 7486, JIS B 1111, BS EN ISO 7047 |
| Slotted raised countersunk head screw | ISO 2010, EN ISO 2010, DIN-EN ISO 2010, PN-EN ISO 2010, GOST 17474-80, IS 8911, JIS B 1101, BS EN 2010 |
| Slotted countersunk head bolts | DIN 7969 |
| Hexagon socket head cap screws with centre, with low head | DIN 6912 |
| Hexagon socket head cap screws with low head | DIN 7984 |
| Square head bolt with collar | DIN 478, PN-87/M-82301 |
| Knurled thumb screw with low head | DIN 653, PN-88/M-82457, GOST 21332-75 |
| Knurled thumb screw with high head | DIN 653, PN-88/M-82456, GOST 21331-75 |
| Hexagon head bolt | DIN 7990, IS 6639 |
| Round head niob bolt | DIN 604, PN-91/M-82408, GOST 7785-81 |
| Cup nibbed head bolt | DIN 607, PN-91/M-82410, GOST 7783-81 |
| Eye bolt | DIN 444, PN-77/M-82425, GOST 14724-69 |
| Hexagon socket set screw with Flat Point | DIN 913, PN-EN ISO 4026 |
| Hexagon socket set screw with Cone Point | DIN 914, PN-EN ISO 4027 |
| Hexagon socket set screw with Dog Point | DIN 915, PN-EN ISO 4028 |
| Slotted set screw with long Dog Point | DIN EN 27435 |
| Countersunk raised head screw - with type H | ISO 7046, EN ISO 7046, DIN-EN ISO 7046, PN-EN ISO 7046, GOST 17475-80, IS 7485, JIS B 1111 |
| Countersunk raised head screw - with type Z | ISO 7046, EN ISO 7046, DIN-EN ISO 7046, PN-EN ISO 7046, GOST 17475-80, IS 7485, JIS B 1111 |
| Pan head screw with cross recess type H | ISO 7045, EN ISO 7045, DIN EN ISO 7045, PN-EN ISO 7045, IS 7483 |
| Pan head screw with cross recess type Z | ISO 7045, EN ISO 7045, DIN EN ISO 7045, PN-EN ISO 7045, IS 7483 |
| Slotted countersunk flat head screw | ISO 2009, ANSI B 18.6.3, ASME B 18.6.3, EN ISO 2009, DIN-EN ISO 2009, PN-EN ISO 2009, GOST 17475-80, IS 1365, JIS B 1101 |
| Slotted set screw with cone point | ISO 7434, EN 27434, DIN-EN 27434, PN-EN 27434, GOST 1476-93 |
| Slotted set screws with cup point | EN 27436, DIN EN 27436, PN-EN 27436 |
| Hexagon socket set screw with Cup Point | ISO 4029, EN ISO 4029, DIN-EN ISO 4029, PN-EN ISO 4029, JIS B 1177 |
| Hexagon socket set screw with Cone Point | ISO 4027, EN ISO 4027, DIN-EN ISO 4027, GOST 8878-93, JIS B 1177 |
| Hexagon socket set screw with Flat Point | ISO 4026, EN ISO 4026, DIN-EN ISO 4026, JIS B 1177 |
| Hexagon socket set screw with Dog Point | ISO 4028, EN ISO 4028, DIN-EN ISO 4028, GOST 11075-93, JIS B 1177 |
| Slotted set screws with flat point | ISO 4766, DIN EN ISO 4766 |
| Slotted headless screw with shank | ISO 2342, DIN EN ISO 2342 |
| Cup head square neck bolt with large head | ISO 8677, DIN 603, PN-87/M82406, GOST 7802-81 |
| Hexagon socket head shoulder screw | ISO 7379, ANSI B 18.3.3M, ASME B 18.3.3M |
| Hexagon socket button head screws | ISO 7380-1, EN ISO 7380-1, DIN EN ISO 7380-1, PN EN ISO 7380-1, GOST ISO 7380-1, JIS B 1174 |
| Hexagon socket button head screws with collar | ISO 7380-2, EN ISO 7380-2, DIN EN ISO 7380-2, PN EN ISO 7380-2, GOST ISO 7380-2 |
| Square head bolt with short dog point | DIN 479 |
| Square head bolt with collar and short dog point with rounded end | DIN 480 |
| Hexagon head set screw with small hexagon and dog point | DIN 561 |
| Hexagon head set screw with small hexagon and half dog point and flat cone point | DIN 564 |
| Hexagon fit bolt with long threaded portion | DIN 609, PN-91/M-82342 |
| Hexagon fit bolt with long threaded portion (fine thread) | DIN 609, PN-91/M-82342, IS 3640 |
| Hexagon head bolt with metric fine pitch thread. Product grades A and B | DIN EN ISO 8765 |
| Hexagon fit bolt | DIN 7968 |
| System HV - Hexagon fit bolt | DIN EN 14399-8 |
| Lifting eye bolt | DIN 580, PN-92/M-82472, GOST 4751-73 |
| Lifting eye bolt (fine thread) | DIN 580, PN-92/M-82472 |
| Studs - Metal end 1d | DIN 938 |
| Studs - Metal end 1.25d | DIN 939 |
| Studs - Metal end 2d | DIN 835 |
| Fasteners - Stud bolt | DIN 976-1A |
| T-head bolt with double nib | DIN 188 |
| Square head bolt | PN-88 M-82121, IS 2585 |
| Eye bolt threaded up to the head | PN-77/M-82426 |
| Hexagon fit bolt with short threaded portion | PN-91/M-82341 |
| Hexagon fit bolt with short threaded portion (fine thread) | PN-91/M-82341 |
| Square head set screw with cone point | PN-87/M-82305 |
| High Strength Structural Bolts | IS 3757 |
| Cup head square neck coach bolts | IS 2609 |
| Bolts | |
| Spring-, Fit- and Spacer Unit 244.16 | FIBRO 244.16, FIBRO 244.16 |
| Shoulder screw 244.17 | FIBRO 244.16, FIBRO 244.16 |
Washers | |
| Plain washer - Normal series - Product grade A | ISO 7089, ANSI B 18.22.1, ASME B 18.22.1, EN ISO 7089, DIN 125-1A, PN-78/M-82005, GOST 6958-78, JIS B 1256 |
| Plain washer - Normal series - Product grade C | ISO 7091, ANSI B 18.22.1, ASME B 18.22.1, EN ISO 7091, DIN ISO 7091, PN ISO 7091, GOST 6958-78, JIS B 1256 |
| Plain washer, chamfered - Normal series - Product grade A | ISO 7090, EN ISO 7090, DIN 125-1B, PN-78/M-82006, GOST 11371-78, JIS B 1256 |
| Plain washer - Large series -- Part 1: Product grade A | ISO 7093-1, EN ISO 7093-1, DIN 9021, PN ISO 7093-1, GOST 9649-78, JIS B 1256 |
| Plain washer - Large series -- Part 2: Product grade C | ISO 7093-2, EN ISO 7093-2, DIN ISO 7093-2, PN ISO 7093-2, JIS B 1256 |
| Plain washer - Extra large series -- Product grade C | ISO 7094, EN ISO 7094, DIN ISO 7094, PN ISO 7094, JIS B 1256 |
| Plain washer - Small series - Product grade A | ISO 7092, EN ISO 7092, DIN 433, PN-78/M-82007, GOST 10450-78, JIS B 1256 |
| Plain washer for clevis pins -- Product grade A | ISO 8738, EN 28738, DIN 1440, PN-EN 28738 |
| Plain washer, chamfered, hardened and tempered for high-strength structural bolting | ISO 7416, EN 14399-6, DIN 6916 |
| Disc spring | EN 16983, DIN 2093 |
| Spring lock washer light | DIN 127, PN-77/M-82008, GOST 6402-70 |
| Spring lock washer for screws with cylindrical head | DIN 7980, GOST 6402-70 |
| Spring look washer, heavy duty | DIN 128, GOST 6402-70 |
| Toothed lock washer with internal teeth | DIN 6797J, PN-82/M-82023 |
| Toothed lock washer with external teeth | DIN 6797A, PN-82/M-82024 |
| Serrated lock washer | DIN 6798J, GOST 10462-81 |
| Serrated lock washer | DIN 6798A, GOST 10463-81 |
| Square washer for wood construction | DIN 436, PN-59/M-82010 |
| Square taper washer for U-section 8% | DIN 434, PN-79/M-82018, GOST 10906 |
| Square taper washer for I-section 14% | DIN 435, PN-79/M-82009 |
| Conical spring washer | DIN 6796, GOST 13439-68 |
| Spherical washer C | DIN 6319, PN-78/M-82026, GOST 13438-68 |
| Spherical washer D | DIN 6319, PN-78/M-82026 |
| Washers for clevis pins - Product grade C | DIN 1441 |
| Wave spring washer | DIN 137, PN-82/M-82037 |
| Square taper washers for high-strength | DIN 6917 |
| Square taper washers for high-strength structual bolting of steel channel sections | DIN 6918 |
| Tabwasher with 1 tab | DIN 93, PN-82M-82021, GOST 13463-77 |
| Tabwasher with 2 tabs | DIN 963, PN-82M-82022, GOST 13464-77 |
| Shim ring | DIN 988 |
| Washer for steel constructions | DIN 7989 |
| Plain washers for bolts with heavy clamping sleeves | DIN 7349 |
| Plain washer, chamfered, hardened and tempered for high-strength structural bolting | DIN EN 14399-6, PN-82/M-82039 |
| Spring lock washer | PN-77/M-82008, JIS B 1251 |
| Plain washer | IS 2016 |
| Square washer | JIS B 1256 |
| Plain washer - Normal diameter, Normal thickness - Product grade A | BS 4320 |
| Plain washer - Normal diameter, Light thickness - Product grade B | BS 4320 |
| Plain washer - Large diameter, Normal thickness - Product grade C | BS 4320 |
| Plain washer - Large diameter, Light thickness - Product grade D | BS 4320 |
| Plain washer - Larger diameter, Normal thickness - Product grade E | BS 4320 |
| Plain washer - Larger diameter, Normal thickness - Product grade F | BS 4320 |
| Plain washer - Largest diameter, Larger thickness - Product grade G | BS 4320 |
| Plain washer, chamfered - Normal series - Product grade A and B | BS 4320 |
| Plain washer, chamfered - Normal series - Product grade C and D | BS 4320 |
| Plain washer, Larger than the M68 | BS 4320 |
Nuts | |
| Hexagon nut, style 1 - Product grade A and B | ISO 4032, EN 24032, DIN-EN 24032, PN-EN 24032, GOST 5915-70, JIS B 1181, BS EN 24032 |
| Hexagon nut - Product grade C | ISO 4034, ANSI B 18.2.2, ASME B 18.2.2, EN 24034, DIN-EN 24034, PN-EN 24034, GOST 5927-70, IS 1363-3, JIS B 1181, BS EN 24034 |
| Hexagon nuts, style 2 -- Product grades A and B | ISO 4033, EN ISO 4033, DIN-EN ISO 4033, PN-EN ISO 4033, JIS B 1181, BS EN 24033 |
| Hexagon thin nuts unchamfered (style 0) - Product grade B | ISO 4036, EN ISO 4036, DIN-EN ISO 4036, PN-EN ISO 4036, JIS B 1181, BS EN 24036 |
| Hexagon high nuts (style 2) with metric fine pitch thread -- Product grades A and B | ISO 8674, EN ISO 8674, DIN-EN ISO 8674, PN-EN ISO 8674, JIS B 1181, BS EN 28674 |
| Hexagon nut, style 1, with metric fine pitch thread - Product grade A and B | ISO 8673, EN 28673, DIN-EN 28673, PN-EN 28673, GOST 5915-70, JIS B 1181, BS EN 28673 |
| Hexagon thin nut (chamfered) -- Product grade A and B | ISO 4035, EN 24035, DIN-EN 24035, PN-EN 24035, GOST 5916-70, JIS B 1181, BS EN 24035 |
| Hexagon thin nut (chamfered) with metric fine pitch thread-Product grade A and B | ISO 8675, EN 28675, DIN-EN 28675, PN-EN 28675, GOST 5916-70, JIS B 1181, BS EN 28675 |
| Steel hexagon nuts with large width across flats for high-strength structural bolting | ISO 7414, EN 14399-4, DIN 6915, PN-EN 14399-4 |
| Prevailing torque type hexagon nut (with non-metallic insert), style 1,- Property class 6, 8 and 10 | ISO 10512, DIN 985, PN-52/M-82175 |
| Prevailing torque type hexagon nut with flange (with non-metallic insert)- Product grade A and B | ISO 1666, EN 1666, DIN-EN 1666, PN-EN 1666 |
| Hexagon flange nut | ISO 4161, EN-ISO 4161, DIN-ISO 4161, PN-EN 1661, GOST P 50592-93 |
| Hexagon flange nut | EN 1663, DIN-EN 1663, PN-EN 1663, GOST 8918-69 |
| Hexagon flange nut | EN 1664, DIN-EN 1664, PN-EN 1664 |
| Hexagon flange nut | DIN-EN 1661, PN-ISO 4161 |
| Hexagon flange nut | DIN 6923 |
| Hexagon flange nut with fine thread | EN 1667, DIN-EN 1667, PN-EN 1667 |
| Hexagon sloted and castle nut - type Z | DIN 935, PN-86/M-82148, GOST 5918-73 |
| Hexagon sloted and castle nut - type K | ISO 7035, EN-ISO 7035, DIN 935, PN-86/M-82148, GOST 5918-73 |
| Thin hexagon castle nut, Sloted and Castle nut - type Z | ISO 7038, EN-ISO 7038, DIN 979, PN-86/M-82159, GOST 5919-73 |
| Thin hexagon castle nut, Sloted and Castle nut - type K | ISO 7038, EN-ISO 7038, DIN 979, PN-86/M-82159, GOST 5919-73 |
| Prevailing torque type hexagon nut | ISO 10511, EN ISO 10511, DIN ISO 10511, PN ISO 10511 |
| Prevailing torque type hexagon nut with fine pitch thread | ISO 10513, EN ISO 10513, DIN ISO 10513, PN ISO 10513 |
| Prevailing torque type hexagon nut | ISO 7040, EN ISO 7040, DIN-EN ISO 7040, PN-EN ISO 7040 |
| Prevailing torque type hexagon nut | ISO 7042, EN ISO 7042, DIN-EN ISO 7042, PN-EN ISO 7042 |
| Prevailing torque type hexagon nut | ISO 7041 |
| Prevailing torque type hexagon nut with flange | ISO 7043 |
| Prevailing torque type hexagon nut with flange | ISO 7044 |
| Prevailing torque type hexagon nut | ISO 7719 |
| Hexagon high nut | DIN 6330, PN-86/M-82155, GOST 15523-70 |
| Hexagon high nut with metric fine pitch thread | DIN 6330, PN-86/M-82155, GOST 15523-70 |
| Hexagon connection nut - height 3 d | DIN 6334 |
| Hexagon nut 1,5d with collar | DIN 6331, PN-87/M-61272 |
| Square nut - type 1 | DIN 557, PN-88/M-82151 |
| Square nut - type 2 | DIN 562, PN-88/M-82151 |
| Knurled thin nut | DIN 467, PN-91/M-82462 |
| Knurled high nut | DIN 466, PN-91/M-82461 |
| Hexagon cap nut | DIN 917, PN-88/M-82182, GOST 11860-85 |
| Hexagon domed cap nut | DIN 1587, PN-88/M-82181, GOST 11860-85 |
| Prevailing torque type hexagon domed cap nuts | DIN 986, PN-64/M-82439 |
| Wing nut | DIN 315, PN-92/M-82472, GOST 3032-76 |
| Lifting eye nut | DIN 582 |
Countersinks | |
| Countersink for countersunk head screw | ISO 7721, DIN 74, PN-87/M-82068 |
| Countersink for hexagon socket head bolt | DIN 974-1, PN-83/M-82069, GOST 12876-67 |
| Countersink for head bolt hexagon and hex nut without washer | DIN 974-2, PN-83/M-82069, GOST 12876-67 |
| Countersink for head bolt hexagon and hex nut with washer | DIN 974-2, PN-83/M-82069, GOST 12876-67 |
| Countersink for countersunk head screw | DIN 66, PN-87/M-82068, GOST 12876-67 |
| Countersink for slotted pan head screws | PN-83/M-82069 |
| Countersink for head bolts hexagon reduced | PN-83/M-82069 |
| Countersink for countersunk self tapping screw | PN-87/M-82068 |
Holes - (through) for screws and bolts | |
| Hole - high quality | DIN EN 20273, GOST 11284-75 |
| Hole - medium quality | DIN EN 20273, GOST 11284-75 |
| Hole - low quality | DIN EN 20273, GOST 11284-75 |
| Blind hole | GOST 12415-80 |
| Elongated hole | |
Taped holes | |
| Taped hole - trough metric | ISO 724, EN ISO 724, DIN-ISO 724, PN ISO 724, GOST 24705-81, JIS B 0205 |
| Taped hole - trough inch | ISO 725, EN ISO 725, DIN-ISO 725, PN ISO 725, JIS B 0206 |
| Taped hole - blind | DIN 76-1, PN-89/M-82063 |
Screws | |
| Slotted pan head screw - Product grade A | ISO 1580, EN ISO 1580, DIN EN ISO 1580, PN EN ISO 1580, GOST 17473-80, IS 6101 |
| Slotted cheese head screw - Product grade A | ISO 1207, EN ISO 1207, DIN EN ISO 1207, PN EN ISO 1207, GOST 1491-80, IS 1366, JIS B 1101 |
| Cross recessed raised countersunk (flat) head tapping screw | ISO 7050, EN ISO 7050, DIN ISO 7050, PN EN ISO 7050, GOST 1145-80, JIS B 1122 |
| Cross recessed raised countersunk (oval) head tapping screw | ISO 7051, EN ISO 7051, DIN ISO 7051, PN EN ISO 7051, GOST 1146-80, JIS B 1122 |
| Slotted raised countersunk (oval) head tapping screw (common head style) | ISO 1483, EN ISO 1483, DIN ISO 1483, PN EN ISO 1483, JIS B 1115 |
| Hexagon head tapping screw | ISO 1479, EN ISO 1479, DIN ISO 1479, PN EN ISO 1479, JIS B 1123 |
| Hexagon flange head tapping screw | ISO 10509, EN ISO 10509, DIN ISO 10509, PN ISO 10509 |
| Slotted pan head tapping screw | ISO 1481, EN ISO 1481, DIN ISO 1481, PN EN ISO 1481, JIS B 1115 |
| Slotted countersunk (flat) head tapping screw (common head style) | ISO 1482, EN ISO 1482, DIN ISO 1482, PN EN ISO 1482, JIS B 1115 |
| Slotted pan head screws with small head | DIN 920 |
| Slotted pan head screws with large head | DIN 921 |
| Slotted pan head screw with small head and full dog point | DIN 922 |
| Slotted pan head screws with shoulder | DIN 923 |
| Slotted raised countersunk head screw with dog point | DIN 924 |
| Slotted countersunk head screw with dog point | DIN 925 |
| Slotted shoulder screws | DIN 927 |
| Slotted raised countersunk (oval) head wood screws | DIN 95 |
| Slotted round head wood screws | DIN 96 |
| Slotted countersunk (flat) head wood screw | DIN 97 |
| Hexagon head wood screws | DIN 571 |
| Hexagon head drilling screw with tapping screw thread with collar | DIN 7504 (K) |
| Slotted hex head self-drilling tapping screw with collar | DIN 7504 (L) |
| Slotted pan head tapping screw | DIN 7971 |
| Slotted countersunk (flat) head tapping screw (common head style) | DIN 7972 |
| Slotted raised countersunk (oval) head tapping screw (common head style) | DIN 7973 |
| Hexagon head tapping screw | DIN 7976 |
| Cross recessed pan head tapping screw | DIN 7981 |
| Cross recessed raised countersunk (flat) head tapping screw | DIN 7982 |
| Cross recessed raised countersunk (oval) head tapping screw | DIN 7983 |
| Cross recessed raised countersunk (oval) head wood screw | DIN 7995 |
| Cross recessed round head wood screw | DIN 7996 |
| Cross recessed raised countersunk (flat) head wood screw | DIN 7997 |
| Self Drilling screw for fiber cement board | DIN 18182 |
Rivets | |
| Plain rivet | DIN 660, PN 82952, GOST 10299-80 |
| Countersunk head rivet | DIN 661, PN 82954, GOST 10300-80 |
| Blind rivet flat head | DIN EN ISO 15977, GOST 15973-2005 |
| Blind rivet countersunk | DIN EN ISO 15978, GOST 15974-2005 |
| Tubular rivet flat head | DIN 7340, PN 82972, GOST 12639-80 |
| Steel round head rivets | DIN 124 |
| Tubular rivet round head | DIN 7340, PN 82973, GOST 12638-80 |
Shafting Collars | |
| External Retaining Ring | DIN 471, PN 85111 |
| Internal Retaining Ring | DIN 472, PN 85111 |
| Circlip For Shafts | DIN 6799, PN 85112 |
| Adjusting rings with set screw | DIN 705, PN 85101 |
| Mushroom head rivet | PN 82957, GOST 10301-80 |
| Flat round head rivet | PN 82958, GOST 10302-80 |
Pins | |
| Parallel pin | ISO 2338, EN ISO 2338, DIN EN ISO 2338, PN EN ISO 2338, GOST 3128-70, JIS B 1354 B |
| Parallel pins, of hardened steel | ISO 8734, PN EN 22339, JIS B 1355 B |
| Taper pin | ISO 2339, EN 22339, DIN EN 22339, PN-84/M-85028, GOST 3129-70 |
| Parallel pin with internal thread | ISO 8733, EN ISO 8733, DIN EN ISO 8733, PN-84/M-85028, JIS B 1359-1 |
| Taper pin with internal thread, ground | ISO 8736, EN 28736, DIN EN 28736, PN EN ISO 8733, GOST 9464-79, JIS B 1358 |
| Grooved pin - Half-length centre grooved | ISO 8743, EN ISO 8743, DIN EN ISO 8743, PN EN 28736, GOST 8743-93 |
| Grooved pin - Full-length taper grooved | ISO 8744, EN ISO 8744, DIN EN ISO 8744, PN EN ISO 8743, GOST 10773-93 |
| Grooved pin - Half-length taper grooved | ISO 8745, EN ISO 8745, DIN EN ISO 8745, PN EN ISO 8744, GOST 8745-93 |
| Grooved pin - Half-length reverse-taper grooved | ISO 8741, EN ISO 8741, DIN EN ISO 8741, PN EN ISO 8745, GOST 8741-93 |
| Grooved pin - One-third-length centre grooved | ISO 8742, EN ISO 8742, DIN EN ISO 8742, PN EN ISO 8741, GOST 8742-93 |
| Grooved pin - Full-length parallel grooved, with pilot | ISO 8739, EN ISO 8739, DIN EN ISO 8739, PN EN ISO 8742, GOST 12850.1-93 |
| Grooved pin - Full-length parallel grooved, with chamfer | ISO 8740, EN ISO 8740, DIN EN ISO 8740, PN EN ISO 8739, GOST 12850.2-93 |
| Spring-type straight pin -- Slotted, heavy duty | ISO 8752, EN ISO 8752, DIN EN ISO 8752, PN EN ISO 8740, GOST 14229-93, JIS B 2808 |
| Spring-type straight pins | ISO 13337, PN EN ISO 8752, JIS B 2808 |
| Spring-type straight pin -- Coiled, standard duty | ISO 8750, EN ISO 8750, DIN EN ISO 8750, PN EN ISO 8750, JIS B 2808 |
| Parallel pin with internal thread | ISO 8735, EN ISO 8735, DIN EN ISO 8735 |
| Grooved pin with round head | ISO 8746, EN ISO 8746, DIN EN ISO 8746 |
| Cylindrical to unravel | DIN 7341, GOST 10774-80 |
Parallel keys | |
| Parallel key with round ends (both ends) (low) | ISO 2491, PN-M-85002, GOST 29175-91 |
| Parallel key with chamfer (low) | ISO 2491, PN-M-85002, GOST 29175-91 |
| Parallel key with round end (one end) (low) | ISO 2491, PN-M-85002, GOST 29175-91 |
| Keyway on shaft | ISO 2491, DIN 6885, PN-M-85005, GOST 23360 |
| Parallel key with round end | DIN 6885, PN-M-85005, GOST 23360 |
| Parallel key with chamfer | DIN 6885, PN-M-85005, GOST 23360 |
| Parallel key with half-length centre hole | DIN 6885, PN-M-85005 |
| Parallel key with chamfer, half-length centre hole | DIN 6885, PN-M-85005 |
| Parallel key with round end, double holes (friction-fit) | DIN 6885, PN-M-85005 |
| Parallel key with chamfer double holes (friction-fit) | DIN 6885, PN-M-85005 |
| Parallel key with round end, half-length centre hole (low) | DIN 6885 |
| Woodruff key | DIN 6888 |
| Parallel key with round end, double holes | PN-M-85005 |
| Parallel key with chamfer, double holes | PN-M-85005 |
| Parallel key with round end (one end) | PN-M-85005, GOST 23360 |
| Parallel key with round end (friction-fit) | PN-M-85005 |
| Parallel key with round end (both ends) (high) | PN-M-85001, GOST 10748-79 |
| Parallel key with chamfer (high) | PN-M-85001, GOST 10748-79 |
| Parallel key with round end (one end) (high) | PN-M-85001 |
Keys | |
| Round ends Taper Key (both ends) | ISO R 773, DIN 6886, PN-M-85031, GOST 24068-80 |
| Taper key with chamfer | ISO R 773, DIN 6886, PN-M-85031, GOST 24068-80 |
| Round end Taper Key (one end) | ISO R 773, PN-M-85031, GOST 24068-80 |
| Taper key with gib head | ISO R 774, DIN 6887, PN-M-85031, GOST 24068-80 |
| Round ends flat key (both ends) | ISO 2492, PN 85035, GOST P 50536-93 |
| Flat key with chamfer | ISO 2492, DIN 6883, PN 85034, GOST P 50536-93 |
| Round end plain key (one end) | ISO 2492, PN 85035, GOST P 50536-93 |
| Plain key with gib head | ISO 2492, PN 85034, GOST P 50536-93 |
| Gib-head saddle key | DIN 6889, PN 85036 |
| Concave, rounded wedge | PN 85037 |
| Concave cut wedge | PN 85036 |
| Concave wedge rounded on one side | PN 85037 |
Centering hole | |
| Centering hole type A | ISO 6411, DIN 332, PN-M-02499, GOST 14034 |
| Centering hole type B | ISO 6411, DIN 332, PN-M-02499, GOST 14034 |
| Centering hole type R | ISO 6411, DIN 332, PN-M-02499, GOST 14034 |
| Centering hole type C | DIN 332, GOST 14034 |
| Centering hole type D | DIN 332 |
| Centering hole type E | GOST 14034 |
| Centering hole type F | GOST 14034 |
| Centering hole type T | GOST 14034 |
Sealing rings | |
| Sealing rings | DIN 7603, PN-M-73060 A |
| O-rings | ISO 3601-1, DIN 3771, PN-M-73060 G, GOST 9833, JIS B 2401-1 |
| Radial Oil Seal type 1 | ISO 6194-1, DIN 3760 A, PN-M-73067, GOST 8752-1, JIS B 2402-1 |
| Radial Oil Seal type 4 | ISO 6194-4, DIN 3760 AS, PN-M-73067, GOST 8752-2, JIS B 2402-4 |
Plain shaft bearings | |
| Flanged bushing | ISO 4379, DIN ISO 4379, PN-M-87250 B |
| Cylindrical bushing | ISO 4379, DIN ISO 4379, PN-M-87250 A |
| Flanged bushing | ISO 2795, DIN 1850 V, PN-93/M-61251 |
| Cylindrical bushing | ISO 2795, DIN 1850 J, PN-93/M-61251 |
| Flanged bushing | ISO 4247 |
| Cylindrical bushing | ISO 4247 |
| Flanged bushing type A | DIN 172 |
| Flanged bushing type B | DIN 172 |
| Cylindrical bushing type A | DIN 179 |
| Cylindrical bushing type B | DIN 179 |
Nuts groove bearings | |
| Rolling bearings - Locknuts | ISO 2982-2, DIN 981, GOST 8530 |
| Slotted Round Nut | DIN 1804, PN-M-82471 |
Rolling bearings | |
| Needle roller thrust bearing with trough inner ring, caged | ISO 3245, PN-M-86295-1, GOST 4060-78 |
| Needle roller thrust bearing with blind inner ring, caged | ISO 3245, DIN 618, PN-M-86295-3, GOST 4060-78 |
| Needle roller thrust bearing with trough inner ring, without cage | ISO 3245, DIN 618, PN-M-86295-2, GOST 4060-78 |
| Needle roller thrust bearing with blind inner ring, without cage | ISO 3245, PN-M-86295-4, GOST 4060-78 |
| Tapered roller bearing - metric | ISO 355, DIN-ISO 355, PN-ISO 355, GOST 27365-87 |
| Single row deep groove ball bearing | DIN 625, PN-M-86100-1, GOST 8338-75 |
| Ball bearing with one shield | DIN 625, PN-M-86100-2, GOST 7242-81 |
| Ball bearing with two shields | DIN 625, PN-M-86100-3, GOST 7242-81 |
| Ball bearing with one rubber seal | DIN 625, PN-M-86100-4, GOST 8882-75 |
| Ball bearing with two rubber seals | DIN 625, PN-M-86100-5, GOST 8882-75 |
| Ball Bearing with snap ring groove on outer ring | DIN 625 |
| Thrust ball bearing with snap ring groove on outer ring | DIN 711, PN-M-86261-1, GOST 7872-89 |
| Thrust ball bearing with snap ring groove on outer ring and washer | DIN 711, PN-M-86261-2, GOST 7872-89 |
| Angular contact ball bearing - Single-direction - 72 i 73 catalogue | DIN 628, PN-M-86160-1, GOST 831-75 |
| Angular contact ball bearing - Dual directions - QJ19, QJ10, QJ2 and QJ3 catalogue | DIN 628, PN-M-86160-2, GOST 8995-75 |
| Angular contact ball bearing - Dual directions | DIN 628, PN-M-86160-6 |
| Self-aligning ball bearing | DIN 630, PN-M-86130-1, GOST 28428-90 |
| Self-aligning ball bearing with tapered bore | DIN 630, PN-M-86130-2, GOST 28428-90 |
| Single row thrust cylindrical bearing | DIN 722, PN-M-86420-1, GOST 23526-79 |
| Double row full complement cylindrical roller bearing NNU49 design | DIN 5412, PN-M-86208-1, GOST 7634-75 |
| Double row full complement cylindrical roller bearing NNU49K design | DIN 5412, PN-M-86208-2, GOST 7634-75 |
| Double row full complement cylindrical roller bearing NN30 design | DIN 5412, PN-M-86208-3, GOST 7634-75 |
| Double row full complement cylindrical roller bearing NN30K design | DIN 5412, PN-M-86208-4, GOST 7634-75 |
| Double row tapered roller bearing | DIN 635, PN-M-86240-1, GOST 5721-75 |
| Double row tapered roller bearing with tapered bore | DIN 635, PN-M-86240-2, GOST 5721-75 |
| Double row tapered roller bearing with tapered bore with pull inner ring | DIN 635, PN-M-86240-3, GOST 5721-75 |
| Ball bearing with tapered bore | PN-M-86100-8 |
| Angular contact ball bearing - Single-direction - catalogue | PN-M-86160-3, GOST 831-75 |
| Angular contact ball bearing - Dual directions - catalogue | PN-M-86160-4, GOST 8995-75 |
| Angular contact ball bearing - Dual directions - QJ19, QJ10, QJ2 and QJ3 catalogue | PN-M-86160-5 |
| Single row cylindrical roller bearing | PN-M-86180-1, GOST 8328-75 |
| Single row cylindrical roller bearing NJ design | PN-M-86180-2, GOST 8328-75 |
| Single row cylindrical roller bearing N design | PN-M-86180-3, GOST 8328-75 |
| Single row cylindrical roller bearing NUP design | PN-M-86180-6, GOST 8328-75 |
| Cylindrical roller bearing without inner ring RN design | PN-M-86180-7 |
| Double row thrust cylindrical bearing | PN-M-86420-2, GOST 23526-79 |
| Multi-row cylindrical roller bearing, caged | PN-M-86208-5 |
| Multi-row cylindrical roller bearing, without cage | PN-M-86208-6, GOST 7634-75 |
Clevis pins | |
| Clevis pin with head and (with or without split pin hole) | ISO 2341, EN 22341, DIN-EN 22341, PN-EN 22341, GOST 9650 |
| Clevis pin without head (with or without split pin hole) | ISO 2340, EN 22340, DIN-EN 22340, PN-EN 22340, GOST 9650 |
Split pin | |
| Split pin | ISO 1234, EN ISO 1234, DIN-EN ISO 1234, PN-EN ISO 1234, GOST 397, JIS B 1351 |
Screw plugs | |
| Hex head screw plug type B | DIN 908, PN-M-73124 |
| Hex head screw plug type A | PN-M-73124 |
Lubricators | |
| Lubricating nipple, cone type - tapered thread | DIN 71412, PN 86002, GOST 19853 |
| Lubricating nipple, cone type - cylindrical thread | DIN 71412, PN 86002 |
| Angle Lubricating nipple, cone type - tapered thread | DIN 71412, PN 86003, GOST 19853 |
| Angle Lubricating nipple, cone type - cylindrical thread | DIN 71412, PN 86003 |
Fasteners -- Ends of parts with external ISO metric thread | |
| Chamfered end (CH) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| As-rolled end (RL) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Rounded end (RN) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Flat point (FL) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Short dog point (SD) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Long dog point (LD) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Cone point (CN) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Truncated cone point (TC) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
| Cup point (CP) | ISO 4753, EN ISO 4753, DIN-EN ISO 4753 |
Springs | |
| Compression spring | |
| Disc spring | |
Screw Connection | |
| Connection (Hexagon head bolt and nut) | |
| Connection (Countersink + Hexagon socket head cap screw and nut) | |
| Connection (Hexagon socket head cap screw + nut) | |
Steel Shapes | |
| Flat steel bar (Hot rolled) | ISO 1035-3, DIN-EN 10058:2004U, EN 10058:2004U, PN-EN 10058:2004U, GOST 103-2006 |
Steel Shapes | |
| L-shape equal angles | ISO 657-1, ASTM A6/A6M, DIN-EN 10056-1:2000, EN 10056-1:2000, PN-EN 10056-1:2000, GOST 8509-93, IS 808, JIS G 3192 |
| L-shape unequal angles | ISO 657-2, ASTM A6/A6M, DIN-EN 10056-1:2000, EN 10056-1:2000, PN-73/H-93460.01, GOST 8510-86, IS 808, JIS G 3192 |
| L-shape unequal angles | PN-EN 10056-1:2000, GOST 19772-93, JIS G 3192-1 |
| L-shape unequal angles | JIS G 3192-2 |
| L-shape equal angles | GOST 19771-93 |
Steel Shapes | |
| C-shape (hot rolled) | ASTM A6/A6M |
| U-shape (economic) | DIN 1026-2:2002-10, PN-71/H-93451, GOST 8240-97, IS 808 |
| U-shape (rolled) | ISO 657-11, DIN 1026-1:2000-3 , PN-86/H-93403, GOST 8278-83, JIS G 3192 |
| U-shape (hot rolled) | PN-H-93400:2003, GOST 8240-97, IS 808 |
| U-shape (yield strength over 490 MPa) | PN-73/H-93460.04 |
Steel Shapes | |
| T-shape (hot rolled) | ISO 657-21, DIN-EN 10055:1999, EN 10055:1999, PN-EN 10055:1999, JIS G 3192 |
Steel Shapes | |
| Z-shape | DIN 1027:2004-04 JIS G 3350B |
| Z-shape (yield strength over 490 MPa) | PN-73/H-93460.08 |
| Z-shape (yield strength up to 490 MPa) | PN-73/H-93460.07 |
Steel Shapes | |
| I-shape (Hot rolled) | ISO 657-15, GOST 8239-89, JIS G 3192 I |
| I-shape (Hot rolled) | DIN 1025-1 |
| Hot rolled I-beams - Part 5 IPE-serie | DIN 1025-5 |
| Hot rolled I-beams - Part 2 HEB-serie | DIN 1025-2 |
| Hot rolled I-beams - Part 3 HEA-serie | DIN 1025-3 |
| Hot rolled I-beams - Part 4 HEM-serie | DIN 1025-4 |
| H-shape (Hot-rolled parallel-flange steel IPE - Dimensions) | PN-H-93419 |
| H-shape (Hot rolled wide-flange steel beams - Dimensions) | DIN 1025, PN-H-93452, GOST 26020-83, IS 808, JIS G 3192 H |
| I-shape ASTM | IS 808 |
| W-shape ASTM | ASTM A6/A6M |
| M-shape ASTM | ASTM A6/A6M |
| S-shape ASTM | ASTM A6/A6M |
| HP-shape | ASTM A6/A6M |
| Steel I-beams and special steel channels | GOST 19425-74 |
Steel Shapes | |
| Welded round structural tubing (Cold formed welded structural hollow sections) | ISO 10799-2, ANSI AISC, DIN-EN 10219-2:2006, EN 10219-2:2006, PN-EN 10219-2:2006, GOST 10704-91 |
| Welded square structural tubing (Cold formed welded structural hollow sections) | ISO 10799-2, ANSI AISC, DIN-EN 10219-2:2006, EN 10219-2:2006, PN-EN 10219-2:2006, GOST 30245-2003 |
| Welded rectangular structural tubing (Cold formed welded structural hollow sections) | ISO 10799-2, ANSI AISC, DIN-EN 10219-2:2006, EN 10219-2:2006, PN-EN 10219-2:2006, GOST 30245-2003 |
| Seamless cold drawn tubes | DIN-EN 10305-1:2011, EN 10305-1:2011, PN-EN 10305-1:2011, GOST 8734-75 |
| Welded cold drawn tubes | DIN-EN 10305-2:2011, EN 10305-2:2011, PN-EN 10305-2:2011, GOST 10707-80 |
| Welded cold sized tubes | DIN-EN 10305-3:2011, EN 10305-3:2011, PN-EN 10305-3:2011, GOST 9567-75 |
| Seamless cold drawn tubes for hydraulic and pneumatic power systems | DIN-EN 10305-4:2011, EN 10305-4:2011, PN-EN 10305-4:2011 |
| Welded square structural tubing (For precision applications) | DIN-EN 10305-5:2011, EN 10305-5:2011, PN-EN 10305-5:2011, GOST 8639-82, JIS G-3466 |
| Welded rectangular structural tubing (For precision applications) | DIN-EN 10305-5:2011, EN 10305-5:2011, PN-EN 10305-5:2011, GOST 8645-68, JIS G-3466 |
Steel Tubes | |
| Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes | ASTM A500 |
Steel Shapes | |
| Welded square structural tubing | ISO 12633-2, DIN-EN 10210-2:2006, EN 10210-2:2006, PN-EN 10210-1:2006 |
| Welded round structural tubing | ISO 12633-2, DIN-EN 10210-2:2006, EN 10210-2:2006, PN-EN 10210-2:2006 |
| Welded rectangular structural tubing | ISO 12633-2, DIN-EN 10210-2:2006, EN 10210-2:2006, PN-EN 10210-5:2006 |
Steel Bars | |
| Round stainless steel bar (Hot rolled) | ISO 1035-1, DIN-EN 10060:2006P, EN 10060:2006P, PN-EN 10060:2004U, GOST 2590-2006 |
| Square steel bar (Hot rolled) | ISO 1035-2, ANSI AISC, DIN-EN 10059:2005P, EN 10059:2006P, PN-EN 10059:2004U, GOST 2591-2006 |
| Hexagon steel bar (Hot rolled) | DIN-EN 10061:2006P, EN 10061:2006P, PN-EN 10061:2004U, GOST 8560-88 |
Steel Rods | |
| Round steel rod | DIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3191A |
| Square steel rod | DIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3191B |
| Rectangular steel rod | DIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3194 |
| Hexagon steel rod | DIN-EN 10017:2006, EN 10017:2006, PN-EN 10017:2006, JIS G 3191C |
Steel Tubes | |
| Seamless steel tube for pressure purposes | DIN-EN 10216:2004, EN 10216:2004, PN-EN 10216:2004 |
| Non-alloy steel tube for liquid purposes (including water) | DIN-EN 10224:2006, EN 10224:2006, PN-EN 10224:2006 |
| Non-alloy steel tubes suitable for welding and threading | DIN-EN 10255:2004 |
| Seamless and welded steel tubes | DIN-EN 10220:2003 |
| Carbon steel tube suitable for screwing | PN-H-74200:1998 |
| General-purpose seamless steel tube | PN-H-74220:1984 |
| Electrically welded steel tubes | GOST 10704-91 |
| Water supply steel pipes | GOST 3262-75 |
| Seamless steel tubes | GOST 550-75 |
| Seamless hot deformed steel pipes | GOST 8732-78 |
| Seamless steel tubes cold deformed | GOST 8734-75 |
| Seamless hot deformed steel pipes | GOST 9940-81 |
| Seamless cold deformed tubes | GOST 9941-81 |
Aluminium Shapes | |
| L-shape | DIN-EN 573, EN 573, PN-EN 573, GOST 13618-97 |
Aluminium Shapes | |
| U-shape | DIN-EN 573, EN 573, PN-EN 573 |
Aluminium Shapes | |
| T-shape | DIN-EN 573, EN 573, PN-EN 573, GOST 13622-91 |
Aluminium Shapes | |
| I-shape | DIN 1025-5, GOST 13621-90 |
Aluminium Shapes | |
| Z-shape | GOST R 50067-92 |
| Z-shape | GOST 13620-90 |
Aluminium profiles | |
| Profil 45 x 45 | |
Flanges | |
| Welding neck flanges ANSI 150lb/sq.in. Up to 12'' | ANSI 150lb/sq.in. |
| Welding neck flanges ANSI 150lb/sq.in. Over 12'' | ANSI 150lb/sq.in. |
| Welding neck flanges ANSI 300lb/sq.in. Up to 12'' | ANSI 300lb/sq.in. |
| Welding neck flanges ANSI 300lb/sq.in. Over 12'' | ANSI 300lb/sq.in. |
| Welding neck flanges | DIN 2632 |
| Welding neck flanges | DIN 2633 |
| Welding neck flanges | DIN 2634 |
| Welding neck flanges | DIN 2635 |
| Welding neck flanges | DIN 2636 |
| Blind flange Form B | DIN 2527 Form B, ISO 7005-1 |
| Blind flange Form T | DIN 2527 Form T |
| Blind flange Form E | DIN 2527 Form E |
| Flat flange for welding Form A | DIN 2573 Form A, ISO 7005-1 |
| Flat flange for welding Form B | DIN 2573 Form B |
| Flat flange for welding Form AS | DIN 2573 Form AS |
| Flat flange for welding Form BS | DIN 2573 Form BS |
| Flat flange for welding Form A | DIN 2576 Form A |
| Flat flange for welding Form B | DIN 2576 Form B |
| Flat flange for welding Form AS | |
| Flat flange for welding Form BS | DIN 2576 Form BS |
| Lapped flanges Plain collars | DIN 2641 |
| Lapped flanges Plain collars | DIN 2642 |
| Welding Flanges for Pressure Vessels Forms A | DIN 28031 |
| Welding Flanges for Pressure Vessels Forms B | DIN 28031 |
| Welding Flanges for Pressure Vessels Forms D | DIN 28032 |
| Welding Flanges for Pressure Vessels Forms F | DIN 28032 |
| Welding Flanges for Pressure Vessels Forms N | DIN 28032 |
| Welding Flanges for Pressure Vessels Forms V | DIN 28032 |
| Welding Flanges for Pressure Vessels Forms R | DIN 28032 |
| Welding Flanges for Pressure Vessels | DIN 28036 |
| Welding neck flanges | DIN-EN 1092-1, EN 1092-1, ISO 7005-1, PN-EN 1092-1, GOST 12821-80 |
| Flat flange | DIN-EN 1092-1, EN 1092-1:2001, ISO 7005-1, PN-EN 1092-1 |
| Blind flange | DIN-EN 1092-1, EN 1092-1, PN-EN 1092-1 |
| Loose plate flanges with weld-on plate collar | DIN-EN 1092-1, EN 1092-1, PN-EN 1092-1 |
| Loose plate flanges with weld-neck collar | DIN-EN 1092-1, EN 1092-1, ISO 7005-1, PN-EN 1092-1 |
| Hubbed slip-on flanges | DIN-EN 1092-1, EN 1092-1, ISO 7005-1, PN-EN 1092-1 |
| Hubbed threaded flanges | DIN-EN 1092-1, EN 1092-1, PN-EN 1092-1 |
| Oval flanges | DIN 2561 |
| Hubbed Socket Welding Flange | ISO 7005-1 |
| Loose Plate Flange with Weld-On Plate Collar | ISO 7005-1 |
Flanges\Grey iron flanges | |
| Blind flange Type A | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Blind flange Type B | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Hubbed threaded flanges | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Integral flange | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
Flanges\Ductile iron flanges | |
| Welding neck flanges | DIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2 |
| Blind flange Type A | DIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2 |
| Blind flange Type B | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Loose plate flanges with weld-neck collar | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Hubbed slip-on flanges | DIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2 |
| Hubbed threaded flanges | DIN-EN 1092-2, EN 1092-2, ISO 7005-2, PN-EN 1092-2 |
| Integral flange | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
Flanges\Malleable iron flanges | |
| Blind flange Type A | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Blind flange Type B | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Hubbed threaded flanges | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
| Integral flange | DIN-EN 1092-2, EN 1092-2, PN-EN 1092-2 |
Fittings | |
| Elbow 45° | ANSI B 16.9 2007, ASME B 16.9 2007, DIN 2605-1, GOST 17375-83 |
| Elbow 90° | ANSI B 16.9 2007, ASME B 16.9 2007, DIN 2605-1, GOST 17375-83 |
| Elbow 180° | ANSI B 16.9 2007, ASME B 16.9 2007, DIN 2605-1, GOST 17375-83 |
| Reducing elbow 90° | ANSI B 16.9 2007, ASME B 16.9 2007 |
| Tee | ANSI B 16.9 2007, ASME B 16.9 2007, GOST 17376-2001 |
| Reducing Tee | ANSI B 16.9 2007, ASME B 16.9 2007 |
| Reducing Crosse | ANSI B 16.9 2007, ASME B 16.9 2007 |
| Eccentric reducer with reduced pressure factor | ANSI B 16.9 2007, ASME B 16.9 2007 |
| Tee DIN 2615 style A | DIN 2615 |
| Tee DIN 2615 style B | DIN 2615 |
| Eccentric reducer with reduced pressure factor | DIN 2616-1 |
| Eccentric reducer with reduced pressure factor | DIN 2616-2 |
| Branch saddles | DIN 2618 |
| Asymmetrical reducer | GOST 17378-2001 |
| Symmetrical reducer | GOST 17378-2001 |
Steel pipes | |
| Stainless steel pipe | ASME B36.19M-2004, DIN 10297-1 |
| Welded and seamless wrought steel pipe | ASME B36.10M-2004 |
| Steel pipe suitable for screwing | DIN 2440 |
| Seamless steel tubes | DIN 2448 GOST 550-75 |
| Seamless steel tubes hydraulic | DIN 2445 |
| Welded steel tubes | DIN 2458 |
| Stainless steel pipe | DIN 2462, ISO 1127 |
| Non-alloy steel tubes suitable for welding and threading | DIN-EN 10255:2004, EN 10255:2004, PN-EN 10255:2004 |
| Non-alloy steel pipe | EN 10224:2006, PN 10224:2006 |
| Seamless steel pipe for pressure purposes | EN 10216:2004, PN 10216:2004 |
| Seamless and welded steel tubes | ISO 4200 |
| Seamless and Welded Austenitic Stainless Steel Pipes | ASTM A312/A312M-09 |
| Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless | ASTM A53/A53M-07 |
| Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures | ASTM A524-96 |
| Stainless Steel Welded Round Tube | ASTM A269 |
| Stainless steel pipe, with thread | PN-H-74200:1998 |
| General-purpose seamless steel tube | PN-H-74220:1994 |
| Seamless steel tube for pressure purposes | GOST 11017-80 |
| Electrically welded steel tubes | GOST 10704-91 |
| Precision steel tubes | GOST 9567-75 |
| Seamless hot deformed steel pipes | GOST 9940-81 |
| Seamless cold deformed tubes | GOST 9941-81 |
Dished ends | |
| Torospherical dished ends | DIN 28011 |
| Torospherical dished ends | DIN 28013 |
| Steel butt-welding pipe fittings | DIN 2617 |
Heat exchangers | |
| Heat exchanger DIN 28184-1 - 2 beams | DIN 28184-1 |
| Heat exchanger DIN 28184-2 - 2 beams | DIN 28184-2 |
Drives and control: | ISO 1219-1 |
| Hydraulic Source of Energy Direction | |
| Path of fluid through valve | |
| Rotary motion | |
| Variability pump, motor etc. | |
| Electric | |
| Closed path or port | |
| Opposing Linear Actuators Limited Angle of Motion | |
| Temperature Indication or control | |
| Prime mover | |
| Spring | |
| Restrictor | |
| Place for including Non-Return valve symbol | |
| Junctions | |
| Flexible | |
| Piston rod | |
| Shaft | |
| Shaft -two ways rotate | |
| Detent positioning limited angle of motion | |
| Locking device or control | |
| Over centre device to prevent stopping on dead centre | |
| Non-specific control | |
| Push button control | |
| Pull button control | |
| Push-Pull button control | |
| Lever control | |
| Pedal control | |
| Treadle control | |
| Plunger control | |
| Plunger control with adjustable lenght | |
| Two way function spring | |
| Two way roller control | |
| Roller control | |
| Solenoid controller 1-winding | |
| Solenoid controller 2-winding | |
| Solenoid controller 2-winding assembly | |
| Electric motor | |
| Piezoelectric component | |
| Pressure controller | |
| Operate valve by differential pressure area | |
| Internal pilot path | |
| External pilot path | |
| Hydraulic pilot (Direct) (steering by application of pressure) | |
| Hydraulic pilot (Direct) (steering by release hydraulic pressure) | |
| Oil Pressure Controller (via Control) (steering by application of pressure) | |
| Oil Pressure Controller (via control) (steering by release hydraulic pressure) | |
| Oil Pressure-indirectly Controller (via Control) (steering by application of pressure) | |
| Oil Pressure-indirectly Controller (via Control) (steering by release hydraulic pressure) | |
| 2-Stage hydraulic pilot | |
| Solenoid Operated pilot Valve-Exhaust pilot stage | |
| Solenoid Operated pilot Valve | |
| Pneumatic and Pilot Stage - Pilot Drain | |
| Solenoid Control Hydraulic Pilot Spring Cantered External Pilot Supply Drain | |
| External feedback | |
| Internal feedback | |
| Hydraulic motor | |
| Fixed capacity with one direction of flow - pump | |
| Hydromotor | |
| Fixed Capacity Bi-Directional Output motor - pump | |
| Hydropumpe/-motor | |
| Variable Capacity (with Undefined Control Mechanism One Direction of Flow) - pump/motor | |
| Fixed Capacity Unit-Directional Output | |
| Variable Capacity (with Hand Control Mechanism Two Directions of Flow) - pump/motor | |
| Hydraulic variable speed drive unit | |
| Pressure-compensated variable pump | |
| Variable pump motor | |
| Single-acting retraction cylinder | |
| Double-acting hydraulic cylinder | |
| Double-acting telescopic hydraulic cylinder | |
| Pneumatic- hydraulic actuator | |
| Pneumatic- hydraulic, continuous operations | |
| Pressure intensifier | |
| Pressure intensifier, continuous operations | |
| Accumulator | |
| Accumulator-Fluid Maintained Under Pressure by Inert Gas | |
| Prime mover, Non-electric | |
| Transient position | |
| Position opposite, extreme positions | |
| Extreme position opposite, middle (neutral) | |
| Directional control valve — with manual control | |
| Directional control valve 2/2, — with lever control | |
| Directional control valve 2/2, — with lever control, with return spring | |
| Directional control valve 3/2, - with roller control, with return spring | |
| Directional control valve 4/2, - with button control, with return spring | |
| Directional control valve 3/3, - with solenoid control, spring centred | |
| Directional control valve 4/3, - with button control, spring centred | |
| Directional control valve 5/3, - 2 stage solenoid and increase pressure, spring centred | |
| Directional control valve 2/2, - with support valve pre-control | |
| Directional control valve 3/2, - with solenoid control, with return spring | |
| Directional control valve 5/2, - with pressure control | |
| Directional control valve 4/3, pre-control | |
| Directional continuous control valve (open), middle (neutral) position | |
| Servo-valve | |
| Shuttle-off valve — free | |
| Shuttle-off valve — free (Simplified symbol) | |
| Shuttle-off valve — spring loaded | |
| Shuttle-off valve — spring loaded (Simplified symbol) | |
| Shuttle-off valve — pilot controlled | |
| Shuttle-off valve — pilot controlled (Simplified symbol) | |
| Shuttle-off valve — pilot controlled, spring loaded | |
| Shuttle-off valve — pilot controlled, spring loaded (Simplified symbol) | |
| Shuttle valve | |
| Shuttle valve (Simplified symbol) | |
| Priority shuttle valve | |
| Priority shuttle valve (Simplified symbol) | |
| Rapid exhaust valve | |
| Rapid exhaust valve (Simplified symbol) | |
| Pressure relief valve, single-stage (Simplified symbol) | |
| Pressure relief valve, two-stage | |
| Pressure sequence valve | |
| Pressure relief valve, electrically operated | |
| Reducing valve - pressure regulator, single-stage | |
| Reducing valve - pressure regulator, two-stage | |
| Reducing exhaust valve | |
| Throttle valve, with manual control | |
| Throttle valve | |
| Gate valve | |
| Adjustable restrictor valve, — with mechanical control against a return spring | |
| One way restrictor valve | |
| Series flow control valve | |
| Series flow control valve (Simplified symbol) | |
| Compensated flow control valve | |
| Compensated flow control valve (Simplified symbol) | |
| Flow control valve — with fixed output and relief port to reservoir | |
| Flow control valve — with fixed output and relief port to reservoir (Simplified symbol) | |
| Vented reservoir open to atmosphere | |
| Vented reservoir with inlet pipe above fluid level | |
| Vented reservoir — with inlet pipe below fluid level | |
| Pressurized reservoir | |
| Filter or strainer | |
| Eingießfilter | |
| Ansaugfilter | |
| Air Filter | |
| Pressure indicator | |
| Pressure gauge | |
| Differential pressure gauge | |
| Liquid level gauge | |
| Thermometr | |
| Flow indicator | |
| Flow meter | |
| Integrating flow meter | |
| Tachometer | |
| Torque meter | |
| Pressure switch | |
| Limit switch | |
| Analog transducer | |
| Pneumatic Source of Energy -direction | |
| Air bleed | |
| Air bleeds (momentary) | |
| Air bleed - adjustable (momentary) | |
| Air exhausts port — plain with no provision for connection | |
| Air exhaust port — threaded for connection | |
| Self-sealing coupling (— connected, without mechanically opened non-return valve) | |
| Self-sealing coupling (— unconnected, without mechanically opened non-return valve) | |
| Self-sealing coupling (— connected, with mechanically opened non-return valves) | |
| Self-sealing coupling (— unconnected, with mechanically opened non-return valves) | |
| Angular/Rotary connection — one way | |
| Angular/Rotary connection — three ways | |
| Pneumatic pilot (Direct) (steering by application of pressure) | |
| Pneumatic pilot (Direct) (steering by release pneumatic pressure) | |
| Pneumatic pilot (Directional valve) (steering by application of pressure) | |
| Pneumatic pilot (Directional valve) (steering by release pneumatic pressure) | |
| Pneumatic Pressure-indirectly controller (via Control) (steering by application of pressure) | |
| Pneumatic Pressure-indirectly controller (via Control) (steering by release hydraulic pressure) | |
| Combined control — by solenoid and pilot Valve-Exhaust pilot stage | |
| Combined control — by solenoid and pilot directional valve | |
| 2-Stage Hydraulic and Pneumatic Pilot drain | |
| Pneumatic motor | |
| Pneumatic motor - variable capacity | |
| Pneumatic motor - fixed capacity, — with two directions of flow | |
| Pneumatic motor - variable capacity, — with two directions of flow | |
| Air compressor | |
| Pneumatic semi-rotary actuator (Oscillating motor) | |
| Single-acting pneumatic extension cylinder | |
| Single-acting pneumatic retraction cylinder | |
| Double-acting pneumatic cylinder | |
| Double acting-Fixed cushion at full area side only - cylinder | |
| Double acting-Adjustable Cushioning at both ends - cylinder | |
| Single acting Telescopic - cylinder | |
| Double acting-Double Piston Rod - cylinder | |
| Rodless cylinder | |
| Pneumatic impact cylinder | |
| Tandem cylinder | |
| Four Acting-Double Piston Rod -built in position controller | |
| Double Acting-Double Piston Rod -built in position controller | |
| Rodless cylinder adjustable cushioning, magnetic | |
| Cable cylinder | |
| Double acting piston Rod with pneumatic brake | |
| Air spring actuator | |
| Pneumatic- hydraulic acturator | |
| Reserve air receiver | |
| Air receiver | |
| Prime mover, Non-eletric | |
| Extreme position opposite, middle ( neutral) | |
| Directional control valve 5/3, - 2 stage solenoid, increase pressure, spring centred | |
| Directional control valve 3/2, - controlled by solenoid with return spring | |
| Directional control valve 5/2 — controlled by pressure in both directions | |
| Directional continuous control valve (close), middle (neutral) position | |
| Pressure regulator | |
| Pressure reducing valve | |
| Adjustable restrictor valve, — with mechanical control against a return spring (Simplified symbol) | |
| Shut-off valve | |
| Throttle valve — with mechanical control against a return spring (braking valve) | |
| Flow divider valve | |
| Filter with additional magnetic element | |
| Filter with contamination indicator | |
| Filter with manual drain | |
| Filter with separator, automatic drain | |
| Filter with separator, manual drain | |
| Air dryer | |
| Lubricator | |
| Conditioning unit | |
| Conditioning unit (Simplified symbol) | |
| Cooler — without representation of the flow lines of the coolant | |
| Cooler — indicating the flow lines of the coolant | |
| Heater (arrows in the diamond indicate the introduction of heat) | |
| Temperature controller | |
| Pulse counter with electric output signal | |
| Pulse counter with pneumatic output signal | |
| Volumenstromanzeige | |
| Druckschalter | |
| Silencer | |
| Symbols control methods - one way acting | |
| Controlling valves with three or more positions | |
| Symbols of control mechanisms with three positions | |
| Controlling by pressure in middle (neutral) position | |
| Elements indirectly controlled | |
| Combined control - by 2 independent control (push-poll button solenoid) | |
| Combined control - by 2 dependent control (solenoid pilot directional valve) | |
| Rasten werden in der gleichen Anzahl | |
| Safety mechanism, protection against overloading technological flow | |
| Safety mechanism, protection against overloading return technological flow | |
| Safety mechanism, protection against overloading every technological flow | |
| Safety mechanism, protection against overloading 2 directions technological flows | |
| Safety mechanism, protection against overloading return stagnancy technological flows | |
| Safety mechanism, protection against overloading return stagnancy-return technological flows | |
| Safety mechanism, protection against overloading technological and stagnancy | |
| Stop in technological flow possible return flow | |
| Stop in return flow possible technological flow | |
| Stop in all flows | |
| Adjustable in technological flow | |
| Adjustable in return flow | |
| Adjustable in all flow | |
| Upholding after technological flow | |
| Upholding after return flow | |
| Upholding after any flow | |
| Setting less accurate technological flow | |
| Setting less accurate return flow | |
| Setting less accurate all flows | |
| Setting accurate and stabilizes technological flow | |
| Setting accurate and stabilizes return flow | |
| Setting accurate and stabilizes all flows | |
| Protection in technological flow | |
| Protection in return flow | |
| Protection in all flow | |
| Blockade after technological flow | |
| Blockade after return flow | |
| Blockade after any flow | |
| Mechanical control of servomotor | |
| Electrical control of servomotor | |
| Dividers proportionate | |
| Flow Dividers - one stage | |
| Flow Dividers - two stages | |
| Individual station for one performance at the same pressure safety | |
| Individual station for one performance at two pressure safety | |
| Individual station with two capacities at the same pressure safety | |
| Individual station with two capacities at two safety pressures | |
| Engine, fixed capacity, — with one direction of flow | |
| Element, fixed capacity, — with two directions of flow | |
| Pomp, variable capacity, — with one direction of flow | |
| Engine, variable capacity, — with one direction of flow | |
| Element, variable capacity, — with one direction of flow | |
| Element, variable capacity, — with two directions of flow | |
| Engine with two directions of flow, - with smooth change of capacity | |
Logical fluid circuits, binary logic symbols: | ISO 5784-1 |
| Logical Element | |
| Symbol qualifier functions AND/OR figures | |
| Connecting symbols | |
| Direction of the flow of information | |
| Deployment of INPUT and OUTPUT | |
| NOT | |
| Entry negation | |
| Entry blocking | |
| Entry blocking - negation | |
| Entry static | |
| Entry dynamic, for which the dynamic state of 1 means the transition from 0 to 1 | |
| Entry dynamic, for which the dynamic state of 1 means the transition from 1 to 0 | |
| ''YES'' | |
| ''NOT'' | |
| ''AND'' | |
| ''OR'' | |
| Elements of processing power | |
| Gauge | |
| Shuttle-off valve, connection, and roll | |
| Engine or a pump with a limited rotate angle | |
| Control element | |
| Conditioners | |
| Gewicht im Speicher | |
| Cylinder | |
| Piston | |
| Some ways to control | |
| Braking | |
| Receiver | |
| Receiver, Accumulator | |
| Open way of flow | |
| Open way of primary flow | |
| Way of flow | |
| Shut-off way of flow | |
| Two ways of flow | |
| Three way of flow | |
| Three way of flow - Shut-off | |
| Four way of flow | |
| Four way of flow - combined internally | |
| All way of flow - Shut-off | |
| Five way of flow | |
Connection line | |
| Connection | |
| Intersection without a connection | |
| Connection point | |
Hydraulic and pneumatic lines: | |
| Operating line | |
| Control cable | |
| Control line | |
| Draw elements which are assembled | |
| Mechanical connections | |
Line types - cables: | |
| Continuous | |
| Border | |
| Center | |
| Dashdot | |
| Dashed | |
| Hidden | |
| Flex | |
| Circulation | |
| Piping, insulated | |
| Piping, heated or cooled and insulated | |
| Insulation | |
| Piping, heated or cooled | |
| Parallel Dot | |
| Parallel | |
| Piping with jacket | |
| Insulation casing pipe | |
| Untreated water | |
| Chemicals | |
| Air | |
| Combustible gases | |
| Non combustible gases | |
| Solid fuels | |
| Combustible waste | |
| Other media | |
| Spiral | |
| Elastic | |
| Elastic dash | |
| Elastic cross | |
| Ribbed pipe | |
| Capillary | |
| Capillary dash | |
| Capillary divide | |
| Liquid metal | |
| Line | |
| Pneumatic | |
| Hydraulic | |
| Elctromagnetic | |
| Mechanical | |
| Software | |
| Electro | |
| Coaxial line | |
| Shielded line | |
| Optical fiber | |
| Digital | |
| Impuls | |
Line types - general: | |
| Platform | |
| Wall | |
| Beton | |
| Fireclay brick | |
| Ground | |
| Weld | |
| Zone | |
| Band | |
Joint signs and welding processes: | |
| Welded, brazed and soldered connections. Welds view | ISO 2553 |
| Welding and similar processes. | ISO 4063 |
Marks: | |
| Surface roughness | ISO 1302 |
| Tolerance | ISO 1101 |
| Quick leader - Curved arrow | |
| Edge | ISO 13715 |
| Projection methods | ISO 5456 |
| Cone | ISO 3040 |
| Measuring point | DIN 6773 |
| Reference arrow | ISO 128 |
| Centre hole | ISO 6411 |
| Zigzag line | |
Joint schemes: | |
| Connection (Hexagon head bolt and nut) | PN-81/N-01613 |
| Screw connection (drill only) | ISO 5845 |
| Elongated hole | ISO 5261 |
| Holes | |
| Rivets | |
| Rivet connection (drill only) | ISO 5845 |